BS EN 50065-1-2011 频率范围为3 KHz-148,5 KHz的低压电气设备的信号传输.一般要求,频带和电磁干扰

标准号：BS EN 50065-1-2011
中文标准名称：频率范围为3 KHz-148,5 KHz的低压电气设备的信号传输.一般要求,频带和电磁干扰
英文标准名称：Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances
标准类型：K30
发布日期：2011/6/30 12:00:00
实施日期：2011/6/30 12:00:00
中国标准分类号：K30
国际标准分类号：33.040.30;33.100.01
引用标准：IEC 60050-161;EN 55016-1-1-2010;EN 55016-1-2-2004;EN 55016-1-4-2010;EN 55016-2-2-2004
适用范围：This standard applies to electrical equipment using signals in the frequency range 3 kHz to 148,5 kHzto transmit information on low voltage electrical systems, either on the public electricity distributionnetwork or within installations in consumers’ premises.It specifies the frequency bands allocated to the different applications, limits for the terminal outputvoltage in the operating band and limits for conducted and radiated disturbance. It also gives themethods of measurement.It does not specify the modulation methods, the coding methods or functional features (except thosefor the prevention of mutual interference).Environmental requirements and tests are not included.NOTE 1 Compliance with this standard does not imply permission to establish communication with locations outsidethe consumer’s installation or with other consumers through the public electricity distribution network where this would nototherwise be allowed.The object of the standard is to limit mutual influence between transmission equipment in electricalinstallations and between such equipment and other equipment. In addition this standard is intended tolimit interference caused by signal transmission equipment to sensitive electronic equipment. However,complete freedom from such interference cannot be assured.NOTE 2 Designers should consider signalling systems in conformance with this standard when determining immunityfor electrical equipment.