BS EN 61005-2004 辐射防护测量仪.中子环境剂量当量(率)计

百检网 2021-07-15
标准号:BS EN 61005-2004
中文标准名称:辐射防护测量仪.中子环境剂量当量(率)计
英文标准名称:Radiation protection instrumentation. Neutron ambient dose equivalent (rate) meters
标准类型:F84
发布日期:2004/12/6 12:00:00
实施日期:2004/12/6 12:00:00
中国标准分类号:F84
国际标准分类号:17.240
适用范围:This International Standard is applicable to all assemblies designed to measure the ambient dose equivalent (rate) due to neutron radiation of energy up to 16 MeV, and which comprise at least: a) a detection assembly, which may, for example, consist of a detector probe for thermalised neutrons and an arrangement of moderating and absorbing media surrounding the detector; b) a measuring assembly with a display for the measuring result, which may be incorporated into a single assembly or connected by means of a flexible cable. NOTE Z If the Equipment consists of separate detector and measurement assemblies the cable between the two shall be that specified by the manufacturer. If the connection is by other means (e.g. radio waves, infrared) or other cables, it is necessary to apply additional requirements with respect to the specific media. The requirements given below pertain to assemblies as defined in the first paragraph. It is acceptable, however, to use assemblies, which do not meet the requirements below when such requirements are not deemed essential for a given purpose. In such cases, the requirements to be applied to the assemblies should be specified by agreement between the manufacturer and the purchaser, but the methods of determination of the characteristics of the assemblies should conform to this standard. No tests are specified in this standard for the performance requirements of the assemblies in pulsed radiation fields, and it is to be considered that an assembly designed to meet this standard may not be suitable for use in such fields. The object of this standard is to specify requirements for the performance characteristics of neutron ambient dose equivalent (rate) meters, and to prescribe the methods of testing in order to determine compliance with this standard. This standard specifies, for the assemblies described in the first paragraph, general characteristics, general test procedures, radiation characteristics, electrical, mechanical, safety and environmental characteristics, and also the identification certificate. Requirements and test procedures are also specified for the alarm performance of the dose equivalent (rate) meters, which are equipped with alarm provisions. NOTE Dose equivalent (rate) meters for neutrons have an energy dependence of ambient dose equivalent response, which may deviate considerably from unity. The response in realistic spectra encountered in workplace fields is such that the deviations in different energy ranges tend to neutralise each other. Consequently, the response in realistic fields is generally much closer to unity. ISO 12789 specifies a list of appropriate neutron sources having broad spectra suitable for the testing of such (rate) meters. Also work places may be specified by agreement between manufacturer and purchaser to be appropriate for testing when the spectral environment is well defined. Unconventional dose equivalent ratemeters, for example consisting of more than one detector probe, have recently become available. For such instruments, evaluation based on mono-energetic neutrons is not relevant. Also for those ratemeters, the above considerations may apply.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司