BS ISO 14853-2005 塑料.含水系统中塑料材料的最大厌氧生物降解能力的测定.生物气产生的测量方法

标准号：BS ISO 14853-2005
中文标准名称：塑料.含水系统中塑料材料的*大厌氧生物降解能力的测定.生物气产生的测量方法
英文标准名称：Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
标准类型：G31
发布日期：2005/2/17 12:00:00
实施日期：2005/2/17 12:00:00
中国标准分类号：G31
国际标准分类号：13.060.70;83.080.01
适用范围：This International Standard specifies a method for the determination of the ultimate anaerobic biodegradability of plastics by anaerobic microorganisms. The conditions described in this International Standard do not necessarily correspond to the optimum conditions for the maximum degree of biodegradation to occur. The test calls for exposure of the test material to sludge for a period of up to 60 days, which is longer than the normal sludge retention time (25 to 30 days) in anaerobic digesters, though digesters at industrial sites can have much longer retention times. The method applies to the following materials: — Natural and/or synthetic polymers, copolymers or mixtures thereof; — Plastic materials which contain additives such as plasticizers, colorants or other compounds; — Water-soluble polymers; — Materials which, under the test conditions, do not inhibit the microorganisms present in the inoculum. Inhibitory effects can be determined using an inhibition control or by another appropriate method (see e.g. ISO 13641). If the test material is inhibitory to the inoculum, a lower test concentration, another inoculum or a pre-exposed inoculum can be used.