BS EN 62286-2004 客户电子产品和网络的服务诊断接口.IEEE 1394的实施

百检网 2021-07-15
标准号:BS EN 62286-2004
中文标准名称:客户电子产品和网络的服务诊断接口.IEEE 1394的实施
英文标准名称:Service diagnostic interface for consumer electronics products and networks - Implementation for IEEE 1394
标准类型:L65
发布日期:2004/5/6 12:00:00
实施日期:2004/5/6 12:00:00
中国标准分类号:L65
国际标准分类号:33.160.01;35.200
适用范围:This International Standard specifies the requirements that have to be implemented in future products that incorporate a digital interface, and service diagnostic software developed for these products. The Service Diagnostic Interface (SDI) requires the use of a PC (desktop or laptop) into which service diagnostic software can be loaded. A part of this PC software has to be standardised while another part of this PC software is manufacturer/product related. To reach a common approach in servicing all products from all manufacturers, it is necessary to standardise specific items in the products (Device Under Test/DUT) as well as in the diagnostic software on the PC. The Service Diagnostic Interface (SDI) is based on the IEEE 1394:1995 specification because this interface will be used in most future products. The use of this connection and existing communication protocols enable implementation in products at low cost, and gives maximum flexibility and efficiency. The SDI consists of: · Specific hardware and software requirements of the DUT. · Specific requirements of the PC: - the Service software, - an IEEE 1394 interface (to be built in if not already present). · The connection between the PC and the DUT. This specification is a minimal specification necessary to be able to carry out computerised diagnosis and covers the standardised software of the PC as well as the standardised software and provisions in the DUT. If an IEEE 1394 interface is present on the product, then the requirement for product identification as described in this document (see 6.3) is mandatory. In addition, all communication for any service application should go through the IEEE 1394 interface only, as described in this document (in Clause 7).

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司