DIN EN 15657-1-2009 建筑物和建筑元件的声学特性.来自建筑设备的空气传递或结构传递的声音的实验室测量.第1部分:设备迁移率大大高于接收迁移率的简化情况,以漩涡浴池为例.英文版本DIN

标准号：DIN EN 15657-1-2009
中文标准名称：建筑物和建筑元件的声学特性.来自建筑设备的空气传递或结构传递的声音的实验室测量.第1部分:设备迁移率大大高于接收迁移率的简化情况,以漩涡浴池为例.英文版本DIN EN 15657-1-2009-10
英文标准名称：Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking
标准类型：P31
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：P31
国际标准分类号：91.120.20
引用标准：EN ISO 140-1-1997;EN ISO 140-3-1995;EN ISO 10848-1-2006;EN ISO 3741-1999;ISO 5348-1998;ISO 7626-1-1986;ISO 7626-2-1990;ISO 16063-21-2003
适用范围：Part 1 of this European Standard shall apply to any source -receiver configuration where the receiver mobilityis 10 dB below the source mobility (see definition of mobility in Clause 3 below). However, part 1 is restrictedfor the moment to whirlpool baths since only this type of building equipment has been experimentally studiedso far; for other types of building equipment, the principle of the method is still valid, but some details in thestandard might not be relevant.Therefore, this first part: specifies methods for the measurement under laboratory conditions of airborne and structure borne sound produced by whirlpool baths connected to low mobility structures; for the case of whirlpool baths, building structures of mass per unit area equal or greater than 220 kg/m2, hollow elements excluded, are considered as low mobility elements;-- defines the expression of the results, including data for comparison between products (single value descriptors) and input data for the prediction method (link to EN 12354-5 explained in Annex B).