BS EN 14636-1-2009 非压力型排水和排污塑料管系统.聚酯树脂混凝土 (PRC).带挠性接头的管道和配件

标准号：BS EN 14636-1-2009
中文标准名称：非压力型排水和排污塑料管系统.聚酯树脂混凝土 (PRC).带挠性接头的管道和配件
英文标准名称：Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC) - Pipes and fittings with flexible joints
标准类型：Q81
发布日期：2010/1/31 12:00:00
实施日期：2010/1/31 12:00:00
中国标准分类号：Q81
国际标准分类号：23.040.50;93.030
引用标准：EN 637;EN 681-1;EN 705;EN 1119;EN 13121-1;EN ISO 75-2;EN ISO 3126;EN ISO 9001-2008
适用范围：This European Standard applies to pipes and fittings made from polyester resin concrete (PRC, see 3.1.23), intended to be used within a drain or sewer system operating without pressure. It applies to products for use in buried installations to be installed by open-trench techniques or pipe jacking.It applies to pipes, fittings and their joints of nominal sizes from DN 150 to DN 3000 for circular cross-sections, from WN/HN 300/450 to WN/HN 1400/2100 for egg-shaped cross-sections and from DN 800 to DN 1800 for kite-shaped cross-sections.The intended use of these products is for the conveyance of sewage, rainwater and surface water attemperatures up to 50 °C, without pressure or occasionally at a head of pressure up to 0,5 bar1), and installed in areas subjected to vehicle and/or pedestrian traffic.NOTE 1 The attention of readers is drawn to applicable requirements contained in EN 476.It specifies definitions, requirements and characteristics of pipes, fittings, joints, materials, test methods and marking.The pipes are classified on the basis of the intended method of installation and cross-sectional shape.NOTE 2 It is the responsibility of the purchaser or specifier to make the appropriate selections, taking into account their particular requirements and any relevant national regulations and installation practices or codes.