BS EN 61646-2008 薄膜地面光电(PV)模数.设计合格鉴定和型号批准

标准号：BS EN 61646-2008
中文标准名称：薄膜地面光电(PV)模数.设计合格鉴定和型号批准
英文标准名称：Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
标准类型：F12
发布日期：2009/7/31 12:00:00
实施日期：2009/7/31 12:00:00
中国标准分类号：F12
国际标准分类号：27.160
引用标准：IEC 60904-1-2006;IEC 60068-2-21;IEC 60068-2-78-2001;IEC 60410;IEC 60721-2-1;IEC 60891;IEC 60904-2;IEC 60904-3;IEC 60904-7;IEC 60904-9;IEC 60904-10;IEC 61215;ISO/IEC 17025
适用范围：This International Standard lays down requirements for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by IEC 61215.The test sequence is derived from IEC 61215 for the design qualification and type approval of terrestrial crystalline silicon PV modules. However, it no longer relies on meeting a plus/minuscriterion before and after each test, but rather on meeting a specified percentage of the rated minimum power after all of the tests have been completed and the modules have been lightsoaked.This eliminates the technology-specific preconditioning necessary to accurately measure the changes caused by the test.This standard does not apply to modules used with concentrators.The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual life expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated.