BS EN ISO 11202-2010 声学.机械装置及设备发出的噪声.应用近似环境更正法进行工作地点和其它试验场所声压级的测量

标准号：BS EN ISO 11202-2010
中文标准名称：声学.机械装置及设备发出的噪声.应用近似环境更正法进行工作地点和其它试验场所声压级的测量
英文标准名称：Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
标准类型：Z32
发布日期：2010/8/31 12:00:00
实施日期：2010/8/31 12:00:00
中国标准分类号：Z32
国际标准分类号：17.140.20
适用范围：This International Standard specifies a method for determining the emission sound pressure levels ofmachinery or equipment, at a work station and at other specified positions nearby, in situ. A work station isoccupied by an operator and may be located in open space, in the room where the source under test operates,in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or morespecified positions may be located in the vicinity of a work station, or in the vicinity of an attended orunattended machine. Such positions are sometimes referred to as bystander positions.Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bandsand C-weighted peak emission sound pressure levels can be determined in accordance with this InternationalStandard, if required.NOTE 1 The contents of the series ISO 11200 to ISO 11205 are summarized in ISO 11200.Methods are given for determining a local environmental correction (subject to a specified limiting maximumvalue) to be applied to the measured sound pressure levels in order to eliminate the influence of reflectingsurfaces other than the plane on which the source under test is placed. This correction is based on theequivalent sound absorption area of the test room and on radiation characteristics (source location ordirectivity at the work station).With the method specified in this International Standard, results of accuracy grade 2 (engineering grade) oraccuracy grade 3 (survey grade) are obtained. Corrections are applied for background noise and, asdescribed above, for the acoustic environment. Instructions are given for the mounting and operation of thesource under test and for the choice of microphone positions for the work station and for other specifiedpositions. One purpose of the measurements is to permit comparison of the performance of different units of agiven family of machines, under defined environmental conditions and standardized mounting and operatingconditions.NOTE 2 The data obtained can also be used for the declaration and verification of emission sound pressure levels asspecified in ISO 4871.