DIN EN 12697-12-2008 沥青混合料.热混沥青的试验方法.第12部分:含沥青试样的水敏感性的测定

标准号：DIN EN 12697-12-2008
中文标准名称：沥青混合料.热混沥青的试验方法.第12部分:含沥青试样的水敏感性的测定
英文标准名称：Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens; English version of DIN EN 12697-12:2008-10
标准类型：E43
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：E43
国际标准分类号：93.080.20
引用标准：EN 1426;EN 12697-6;EN 12697-8;EN 12697-23;EN 12697-27;EN 12697-29;EN 12697-30;EN 12697-31;EN 12697-32;EN 12697-33;EN 13108-1
适用范围：This European Standard describes three test methods for determining the effect of saturation and acceleratedwater conditioning.These methods can be used to evaluate the effect of moisture with or without anti-stripping additives includingliquids, such as amines, and fillers, such as hydrated lime or cement:-- method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures;-- method B uses the compression strength of cylindrical specimens of bituminous mixtures;-- method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value.Method A and method B give the same result on average. However, if the slenderness of the specimens isless than 0,5, method B is not suitable.Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ℃ of 4000 mm2/s or less, forwhich methods A and B are not suitable.NOTE Methods A and B are suitable for soft asphalt mixtures with bitumen of viscosity at 60 ℃greater than4000 mm2/s.