SAE AMS 7379-2008 橡胶:航空器发动机油,燃料和液压系统中弹性密封物用硬度为70～80,低温密封Tg -40℉(-40℃)的碳氟化合物人造橡胶(FKM)

标准号：SAE AMS 7379-2008
中文标准名称：橡胶:航空器发动机油,燃料和液压系统中弹性密封物用硬度为70～80,低温密封Tg -40℉(-40℃)的碳氟化合物人造橡胶(FKM)
英文标准名称：Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 °F (-40 °C) for Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
标准类型：V13
发布日期：2008/7/16 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V13
国际标准分类号：49.025.40
引用标准：SAE AMS 2817;SAE AS 568;SAE AIR 851;ASTM D 297;ASTM D 395;ASTM D 471;ASTM D 573;ASTM D 1329;ASTM D 1414;ASTM D 1418;ASTM D 2240;ISO 3601-3;PRI PD 2000
适用范围：1.1 FormThis specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to beused in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospaceapplications.1.2 ApplicationThese products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels,and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. Thisfluorocarbon (FKM) has a service temperature range of -60 to +400 °F (-51 to +204 °C) in air.1.3 Safety - Hazardous MaterialsWhile the materials, methods, applications, and processes described or referenced in this specification may involve theuse of hazardous materials, this specification does not address the hazards, which may be involved in such use. It is thesole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to takenecessary precautionary measures to ensure the health and safety of all personnel involved.