BS EN 14791-2005 固定源排放.二氧化硫质量浓度的测定.参照法

百检网 2021-07-15
标准号:BS EN 14791-2005
中文标准名称:固定源排放.二氧化硫质量浓度的测定.参照法
英文标准名称:Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
标准类型:Z15
发布日期:2006/1/16 12:00:00
实施日期:2006/1/16 12:00:00
中国标准分类号:Z15
国际标准分类号:13.040.40
引用标准:ENV 13005;EN 13284-1;CEN/TS 14793
适用范围:This European Standard describes a manual method for sampling and determining SO2 content in ducts and stacks emitting to the atmosphere by two analytical methods: Ion chromatography and Thorin method.This European Standard is the Standard Reference Method (SRM) for periodic monitoring and for calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, the user shall demonstrate that the performance characteristics of the method are better than the performance criteria defined in this European Standard and that the overall uncertainty of the method is less than ± 20,0 % relative at the daily Emission Limit Value (ELV).An Alternative Method to this SRM may be used provided that the user can demonstrate equivalence according to the Technical Specification CEN TS 14793, to the satisfaction of his national accreditation body or law.This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration and large combustion installations. It has been validated for sampling periods of 30 min in the range of (0,5 to 2 000) mg/m3 SO2 for Ion Chromatography variant and 5 mg/m3 to 2 000 mg/m3 SO2 for Thorin method according to emission limit values laid down in the following Council Directives: Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants; Council Directive 2000/76/EC on waste incineration plants.The limit values of EU Directives are expressed in mg SO2/m3, on dry basis and at the reference conditions of 273 K and 101,3 kPa.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司