ISO 19904-1-2006 石油和天然气工业.漂浮离岸设施.第1部分:单体船、半潜水船和轻甲板船

标准号：ISO 19904-1-2006
中文标准名称：石油和天然气工业.漂浮离岸设施.第1部分:单体船、半潜水船和轻甲板船
英文标准名称：Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars
标准类型：E94
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：E94
国际标准分类号：75.180.10
适用范围：This part of ISO 19904 provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions:- production;- storage and/or offloading;- drilling and production;- production, storage and offloading;- drilling, production, storage and offloading.Its requirements do not apply to the structural systems of mobile offshore units (MOUs). These include,among others:- floating structures intended primarily to perform drilling and/or well intervention operations (often referredto as MODUs), even when used for extended well test operations;- floating structures used for offshore construction operations (e.g. crane barges or pipelay barges), for temporary or permanent offshore living quarters (floatels), or for transport of equipment or products (e.g.transportation barges, cargo barges), for which structures reference is made to relevant recognized classification society (RCS) rules.Its requirements are applicable to all possible life-cycle stages of the structures defined above, such as- design, construction and installation of new structures, including requirements for inspection, integritymanagement and future removal,- structural integrity management covering inspection and assessment of structures in-service, and- conversion of structures for different use (e.g. a tanker converted to a production platform) or reuse at different locations.The following types of floating structure are explicitly considered within the context of this part of ISO 19904:a) monohulls (ship-shaped structures and barges);b) semi-submersibles;c) spars.In addition to the structural types listed above, this part of ISO 19904 covers other floating platforms intended to perform the above functions, consisting of partially submerged buoyant hulls made up of any combination of plated and space frame components and used in conjunction with the stationkeeping systems covered in ISO 19901-7. These other structures can have a great range of variability in geometry and structural forms and, therefore, can be only partly covered by the requirements of this part of ISO 19904. In other cases, specific requirements stated in this part of ISO 19904 can be found not to apply to all or part of a structure under design.In all the above cases, conformity with this part of ISO 19904 will require that the design is based upon its underpinning principles and achieves a level of safety equivalent, or superior, to the level implicit in it.This part of ISO 19904 is applicable to steel floating structures. The principles documented herein are, however, considered to be generally applicable to structures fabricated in materials other than steel.