BS EN 55015-2006+A2-2009 电气照明和类似设备无线电干扰特性的限值和测量方法

标准号：BS EN 55015-2006+A2-2009
中文标准名称：电气照明和类似设备无线电干扰特性的限值和测量方法
英文标准名称：Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
标准类型：L06
发布日期：2007/1/31 12:00:00
实施日期：2007/1/31 12:00:00
中国标准分类号：L06
国际标准分类号：29.140.01;33.100.10
引用标准：IEC 60050-161-1990;IEC 60155-1993;IEC 60598-1-2003;CISPR 16-1-1-2003;CISPR 16-1-2-2003;CISPR 16-1-4-2003;CISPR 16-2-1-2003;CISPR 16-4-2-2003;CISPR 22-2005;IEC 61000-4-6-2003
适用范围：This standard applies to the emission (radiated and conducted) of radiofrequency disturbances from:– all lighting equipment with a primary function of generating and/or distributing light intendedfor illumination purposes, and intended either for connection to the low voltage electricitysupply or for battery operation;– the lighting part of multi-function equipment where one of the primary functions of this isillumination;– independent auxiliaries exclusively for use with lighting equipment;– UV and IR radiation equipment;– neon advertising signs;– street/flood lighting intended for outdoor use;– transport lighting (installed in buses and trains).Excluded from the scope of this standard are:– lighting equipment operating in the ISM frequency bands (as defined in Resolution 63 (1979) of the ITU Radio Regulation);– lighting equipment for aircraft and airports;– apparatus for which the electromagnetic compatibility requirements in the radio-frequencyrange are explicitly formulated in other IEC or CISPR standards.The frequency range covered is 9 kHz to 400 GHz.Multi-function equipment which is subjected simultaneously to different clauses of this standardand/or other standards shall meet the provisions of each clause/standard with the relevant functions in operation.The limits in this standard have been determined on a probabilistic basis to keep the suppression of disturbances within economically reasonable limits while still achieving an adequate level of radio protection and electromagnetic compatibility. In exceptional cases, additional provisions may be required.