ISO 16784-1-2006 金属与合金的腐蚀.工业冷却水系统中的腐蚀和结污.第1部分:进行开放式循环冷却水系统用腐蚀和结污控制添加剂的实验性规模评价的指南

标准号：ISO 16784-1-2006
中文标准名称：金属与合金的腐蚀.工业冷却水系统中的腐蚀和结污.第1部分:进行开放式循环冷却水系统用腐蚀和结污控制添加剂的实验性规模评价的指南
英文标准名称：Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
标准类型：A29;H25
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A29;H25
国际标准分类号：77.060
引用标准：ISO 8044-1999;ISO 16784-2
适用范围：This part of ISO 16784 applies to corrosion and fouling in industrial cooling water systems.This part of ISO 16784 covers the criteria that must be defined and implemented in a pilot-scale testing programme to select water treatment programmes for use in specific recirculating cooling water systems.This part of ISO 16784 covers only open recirculating cooling water systems. Closed cooling systems and once-through cooling water systems are specifically excluded.This part of ISO 16784 applies only to systems incorporating shell-and-tube heat exchangers with standard uncoated smooth tubes and cooling water on the tube side. Heat exchangers with shell-side water, plate and frame and/or spiral heat exchangers, and other heat exchange devices are specifically excluded. However, when the test conditions are properly set up to model the surface temperature and shear stress in more complex heat-transfer devices, the test results may predict what may occur in an operating heat exchanger of that design.The test criteria established in this part of ISO 16784 are not intended to govern the type of bench and pilot-scale testing normally carried out by water treatment companies as part of their proprietary product-development programmes. However, water treatment companies may choose to use the criteria in this part of ISO 16784 as guidelines in the development of their own product-development test procedures.