BS EN 10083-3-2006 淬硬钢和回火钢.合金钢的交货技术条件

标准号：BS EN 10083-3-2006
中文标准名称：淬硬钢和回火钢.合金钢的交货技术条件
英文标准名称：Steels for quenching and tempering — Part 3: Technical delivery conditions for alloy steels
标准类型：H40
发布日期：2006/8/31 12:00:00
实施日期：2006/8/31 12:00:00
中国标准分类号：H40
国际标准分类号：77.140.10
引用标准：EN 10002-1;EN 10020;EN 10027-1;EN 10027-2;EN 10045-1;EN 10221;CR 10261;EN 10308;EN ISO 377;EN ISO 642;EN ISO 643;EN ISO 3887;EN ISO 6506-1;EN ISO 6508-1-2005;EN ISO 14284;EN 10083-1-2006;EN 10160;EN 10163-2;EN 10204
适用范围：This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006,Clause 1),- bars (see NOTE 2 in EN 10083-1:2006, Clause 1),- rod,- wide flats,- hot-rolled strip and sheet/plate,- forgings (see NOTE 2 in EN 10083-1:2006, Clause 1),manufactured from the direct hardening alloy steels for quenching and tempering and the alloy flame andinduction hardening steels and supplied in one of the heat treatment conditions given for the different types ofproducts in Table 1, lines 2 to 6, and in one of the surface conditions given in Table 2.The steels are generally intended for the fabrication of quenched and tempered, flame or induction hardenedmachine parts.The requirements for mechanical properties given in this document are restricted to the sizes given in Table 8.NOTE This document does not apply for bright steel products. For bright steel products EN 10277-1 and EN 10277-5apply.In special cases, variations in these technical delivery requirements or additions to them may be agreed at thetime of enquiry and order (see Annex A).