IEC 60684-3-212-2005 绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管

标准号：IEC 60684-3-212-2005
中文标准名称：绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管
英文标准名称：Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
标准类型：K15
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：K15
国际标准分类号：29.035.20
引用标准：IEC 60684-1-2003;IEC 60684-2-1997;IEC 60684-2;IEC 60757-1983;ISO 846-1997
适用范围：This standard gives the requirements for four types of heat-shrinkable polyolefin sleevings suitable for use at temperatures up to 135 ℃. Type A Flame retarded, shrink ratio 2:1 Type B Not flame retarded, shrink ratio 2:1 Type C Flame retarded, shrink ratio 3:1 Type D Not flame retarded shrink ratio 3:1 These sleevings are normally supplied with internal diameters up to 102 mm for shrink ratios of 2:1 and up to 39 mm for shrink ratios of 3:1 and in the following colours for types A and C: black, brown, red, yellow, green, blue, orange, violet, grey, white and green/yellow. Types B and D are transparent. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 3, 4, 5 and 6 except for dimensions and mass. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.