BS EN 12012-2-2001+A2-2008 橡胶和塑料机械.粉碎机.多芯铰线的安全性要求

标准号：BS EN 12012-2-2001+A2-2008
中文标准名称：橡胶和塑料机械.粉碎机.多芯铰线的安全性要求
英文标准名称：Rubber and plastics machines - Size reduction machines - Safety requirements for strand pelletisers
标准类型：G95
发布日期：2001/8/31 12:00:00
实施日期：2001/8/31 12:00:00
中国标准分类号：G95
国际标准分类号：83.200
引用标准：EN ISO 4871-1996;EN 294-1992;EN 418-1992;EN 563-1994;EN 953-1997;EN 954-1-1996;EN 1037-1995;EN 1070;EN 1088-1995;EN 50014;EN 50015;EN 50016;EN 50017;EN 50018;EN 50019;EN 50020;EN 60204-1-1997;EN 60529-1991;EN ISO 3741-1999;EN ISO 9614-1-1995;EN ISO 9614-2
适用范围：This standard specifies the essential safety requirements applicable to the design and construction ofstrand pelletisers used for plastics and rubber and fed continuously by an extruder or a reactor.The machine begins with the feed opening of the feeding device, or start-up devices if fitted, and ends with thedischarge area.Only the significant hazards listed in clause 4 and dealt with in clause 5 are subject to this standard.NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosiveatmospheres can be applicable to the type of machine or equipment covered by this European Standard. The presentstandard is not intended to provide means of complying with the essential health and safety requirements of Directive94/9/EC.This standard applies to machines which are manufactured after the date of approval of this standard byCEN.