BS EN 1726-2-2000 工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.带高架驾驶位的货车和专为超负荷运行设计的货车的附加要求

标准号：BS EN 1726-2-2000
中文标准名称：工业货车的安全.荷载能力至10000Kg的自行货车和拉杆拉力至20000N的工业牵引车.带高架驾驶位的货车和专为超负荷运行设计的货车的附加要求
英文标准名称：Safety of industrial trucks - Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N. Additional requirements for trucks with elevating operator position and trucks specifically
标准类型：T09
发布日期：2000/11/15 12:00:00
实施日期：2000/11/15 12:00:00
中国标准分类号：T09
国际标准分类号：53.060
适用范围：1 This European Standard is applicable, in addition to EN 1726-1 to industrial trucks designed to travel indoors on smooth level prepared surfaces and equipped with vertical, non tilting mast. a) with an elevating operator position, as defined in 3.1.3.1.6 and 3.1.3.3 of ISO 5053, where the elevating operator position and the load handling device lifts simultaneously to a height of more than 1 200 mm above ground level and b) with a load handling device elevated more than 1 200 mm as defined in 3.1.3.1.10 of ISO 5053 For both types of truck the load handling device can be elevated, lowered or horizontally displaced, laden or unladen, while the truck is travelling. Trucks can be used in guidance systems, without guidance systems or in both systems, and are not intended to tow or push. 2 This European Standard covers the technical requirements necessary to minimise the specific hazards listed in clause 4 which could occur during normal operation and maintenance (in accordance with the data given by the manufacturer or his authorised representative) of industrial trucks. This European Standard does not cover those requirements to minimise hazards which may occur: - during construction - when handling suspended loads which may swing freely - when using trucks on public roads - when using a work platform fitted to a truck not specifically designed to elevate persons - when using trucks see 1.1 with tiltable mast. This European Standard does not repeat all technical rules which are state of the art and which are applicable to the material used to construct the industrial truck. Reference should be made to EN 292-2. 3 This European Standard applies to industrial trucks equipped with load handling devices for normal industrial duties, e.g. fork arms and platforms, or attachments for specified applications. Fork arms, load platforms and integrated attachments are considered to be parts of the industrial truck. Attachments mounted on the load carrier or on the fork arms which are removable by the user are not considered to be part of the industrial truck. For attachments the appropriate clauses of this standard are applicable. 4 Where industrial trucks are required to operate in severe conditions (e.g. in extreme climates, in freezer applications, strong magnetic fields) special precautions may be necessary. These are not covered by this standard. 5 For trucks with elevating operator position up to and including 1 200 mm and/or trucks especially designed to travel with elevated load up to and including 1 200 mm the requirements of EN 1726-1 apply.