BS EN 1940-1996 自粘胶带.断裂强度的测量

标准号：BS EN 1940-1996
中文标准名称：自粘胶带.断裂强度的测量
英文标准名称：Self adhesive tapes - Measurement of breaking strength
标准类型：G38
发布日期：1996/10/15 12:00:00
实施日期：1996/10/15 12:00:00
中国标准分类号：G38
国际标准分类号：83.180
适用范围：This standard specifies a method to measure the breaking strength of a self adhesive tape when it is subjected to a tensile force sufficient to cause it to break. The breaking strength of adhesive tape is of value as an indication of its uniformity and quality, and its ability to withstand stresses during application and use. The maximum width of adhesive tape tested by this method is 25 mm. For adhesive tapes of this width or less, the breaking strength measured corresponds to that as supplied commercially, with factory-cut edges. For adhesive tapes wider than 25 mm, this test method provides for the adhesive tape to be cut down to 25 mm with a well-sharpened instrument.In such cases, because of the better cutting of the edges, the results can be higher than would be found on commercial tape.