BS ISO 965-5-1998 ISO普通米制螺纹. 公差.第5部分:与镀锌前公差带位置为H最大尺寸的热浸镀锌外螺纹相匹配的内螺纹的极限尺寸

标准号：BS ISO 965-5-1998
中文标准名称：ISO普通米制螺纹. 公差.第5部分:与镀锌前公差带位置为H*大尺寸的热浸镀锌外螺纹相匹配的内螺纹的*限尺寸
英文标准名称：ISO general purpose metric screw threads - Tolerances - Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
标准类型：J13
发布日期：1999/4/15 12:00:00
实施日期：1999/4/15 12:00:00
中国标准分类号：J13
国际标准分类号：21.040.10
适用范围：This part of ISO 965 specifies deviations and limits of sizes for pitch and crest diameters for ISO general purpose metric internal screw threads conforming to ISO 262 having basic profile according to ISO 68-1. Internal screw threads according to this part of ISO 965 are intended to mate with external screw threads with maximum size of tolerance position h before hot-dip galvanizing. The limits of sizes for the tolerance quality specified are derived from tolerances specified in ISO 965-1. The fundamental deviations for internal screw threads with a tolerance position AZ have been calculated according to the following formula: EIAZ = + (300 + 20P) where EI is expressed in micrometres; P is expressed in millimetres. The fundamental deviations for internal screw threads with a tolerance position AX have been calculated according to the following formula: EIAX = + (220P - 20) where EI is expressed in micrometres; P is expressed in millimetres. Products made with thread tolerances according to this part of ISO 965 may show load failure when tested in accordance with ISO 898-2 without adjustment of the other mechanical properties. Internal screw threads with thread tolerances according to this part of ISO 965 must not be mated with external screw threads having thread tolerances according to ISO 965-4 because such combinations will create severe risk of thread stripping. NOTE Internal screw threads with tolerance class 6AZ are primarily intended to mate with external screw threads centrifuged after hot-dip galvanizing. Internal screw threads with tolerance class 6AX are primarily intended to mate with hot-dip galvanized external screw threads with heavy coating not centrifuged.