ISO 10791-5-1998 加工中心检验条件 第5部分:工件夹持板的定位精度和重复定位精度

标准号：ISO 10791-5-1998
中文标准名称：加工中心检验条件 第5部分:工件夹持板的定位精度和重复定位精度
英文标准名称：Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets
标准类型：J58
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J58
国际标准分类号：25.040.10
适用范围：This part of ISO 10791 specifies, with reference to ISO 230-1 and ISO 230-2, the tests intended to assess the repeatability of positioning of individual pallets and the total accuracy of positioning of a batch of pallets associated with a specific machine. In a manufacturing system the accuracy of positioning of a workpiece or a work-holding fixture depends on the fitting between pallets and receivers. It should be noted that this part of ISO 10791 applies to a single machining centre, i.e. to the single receiver, with multiple pallets. The results of the tests considered here could be extended to the whole manufacturing system only if the measuring instruments were placed on the different machines exactly in the same position with respect to the origins of the linear axes. This, in practice, is difficult and inaccurate, because origins of the linear axis are affected by the repeatability of the axes.