BS EN 60603-10-1998 印制电路板用频率低于3 MHz的连接器.倒置型2.54 mm(0.1 in)基本网格印制电路板用二部式连接器

标准号：BS EN 60603-10-1998
中文标准名称：印制电路板用频率低于3 MHz的连接器.倒置型2.54 mm(0.1 in)基本网格印制电路板用二部式连接器
英文标准名称：Connectors for frequencies below 3 MHz for use with printed boards - Two-part connectors for printed boards for basic grid of 2, 54 mm (0,1 in), inverted type
标准类型：L30
发布日期：1998/5/15 12:00:00
实施日期：1998/5/15 12:00:00
中国标准分类号：L30
国际标准分类号：31.220.10
适用范围：This specification covers a group of related two-part connectors for printed boards. It describes connectors with 32, 48, 64 and 96 contacts for low-voltage applications. The board-mounted connectors with female contacts are provided with terminations suitable for printed boards in accordance with IEC 326 and using a grid of 2,54 mm (0,1 in) as laid down in IEC 97. The fixed connectors with male contacts are provided either with solder contacts or with wrap contacts. The terminations of the fixed connectors are located in such a way as to be suitable for use with mother boards using a grid of 2,54 mm (0,1 in) as laid down in IEC 97 as well as for automatic wiring techniques. This standard shall be used in conjunction with the following IEC publications: Publications Nos. 50(581) (1978): International Electrotechnical Vocabulary (IEV) - Chapter 581: Electromechanical components for electronic equipment. 97 (1970): Grid system for printed circuits. 194 (1988): Terms and definitions for printed circuits. 326: Printed boards. 512: Electromechanical components for electronic equipment; Basic testing procedures and measur-ing methods. 603-1 (1991): Connectors for frequencies below 3 MHz for use with printed boards, Part 1: Generic specification -General requirements and guide for the pre-paration of detail specifications, with assessed quality.