BS EN 60603-5-1998 印制板用频率低于3MHz的连接器.有2·54mm(0·10in)间距为2.54mm的双面印制板插座和两件连接器

标准号：BS EN 60603-5-1998
中文标准名称：印制板用频率低于3MHz的连接器.有2·54mm(0·10in)间距为2.54mm的双面印制板插座和两件连接器
英文标准名称：Connectors for frequencies below 3 MHz for use with printed boards - Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
标准类型：L30
发布日期：1998/5/15 12:00:00
实施日期：1998/5/15 12:00:00
中国标准分类号：L30
国际标准分类号：31.220.10
适用范围：This standard covers a range of connectors with 2.54 mm (0.1 in) spacing intended to connect a double sided printed board to another printed board or wires. Two kinds of connector are available: - One-part edge-socket connector. Fixed connector or (female) receptacle is intended to mate with edge board contacts. - Two-part connector. Fixed connector or (female) receptacle is intended to mate with free connector of board-mounted (male) connector. For these two cases, fixed connectors or (female) receptacles are the same. Fixed connectors are available with: - solder terminations for wire, - solder terminations for board up to 3.44 mm (0.135 in), - wrapped terminations. Free connectors are provided with flat solder terminations for double sided board of nominal thick-ness 1.6 mm (0.063 in). For edge-socket connectors only, polarization and coding are available by means of a device mounted instead of two opposite contacts.