IS 8544 Pt.3/Sec.1-1979

百检网 2021-07-17
标准号:IS 8544 Pt.3/Sec.1-1979
发布日期:1979/9/1 12:00:00
实施日期:1999/12/31 12:00:00
适用范围:1.1 This standard ( Part Ill/Sec 1 ) applies to starters for industrial use, designed for starting an ac induction motor having a wound rotor, by cutting out resistor previously inserted in the rotor circuit, and to provide means for the protection of the motor against operating over-loads, and to cause intentionally the motor to stop.1.2 It applies only to starters, the main contacts of which are intended to be connected to supply circuits the rated voltage of which does not exceed 1000 V ac. In the case of asynchronous slip-ring motors ( wound-rotors ), the highest voltage between slip-rings shall be not greater than twice the rated insulation voltage of the switching devices inserted in the rotor circuit ( see 4.4.1.4 ).Note — This easement is based on the fact that the electric stresses are less severe in the rotor than in the stator and are of short duration.1.3 This standard also applies to starters for two directions of rotation when reversal of connections is made with the motor stopped ( see 4.4.6 ). Operations including inching and plugging will necessitate additional requirements and shall be subject to agreement between the manufacturer and the user.1.4 This standard applies to resistors which are part of the starter or constitute a unit specially designed to be associated with the starter.1.5 The starters dealt with in this standard are not designed to interrupt short-circuit currents. Therefore, suitable short-circuit protection [ see Appendix A of IS : 8544 ( Part I )-1977* ] shall form part of the installation, but not necessarily in the starter.The clauses of this standard relating to overload protection may not apply in the case of controlgear associated with built-in over-temperature protective devices.Note — The expression ' built-in ' means ' built into the motor '.1.6 This standard does not apply to:a) unbalanced starters, namely, where the resistances do not have the same value in all phases;b) equipment designed not only for starting, but also for adjustment of speed;c) liquid starters and those of the 《 liquid-vapour 》 types; and d) static starters using semi-conductor elements.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司