SAE AMS 5355J-2009 钢熔模铸件16Cr 4.1Ni 0.28Cb 3.2Cu均化作用和溶解热处理或均化作用、溶解和沉淀物热处理的耐腐蚀性和耐热性

百检网 2021-07-20
标准号:SAE AMS 5355J-2009
中文标准名称:钢熔模铸件16Cr 4.1Ni 0.28Cb 3.2Cu均化作用和溶解热处理或均化作用、溶解和沉淀物热处理的耐腐蚀性和耐热性
英文标准名称:Steel, Corrosion Resistant, Investment Castings 16Cr 4.1Ni 0.28Cb 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
标准类型:V11
发布日期:2009/10/23 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:V11
国际标准分类号:49.025.10
引用标准:ASTM E 8/E 8M-2008;ASTM E 8/E 8M-2009;ASTM E 18-2008;ASTM E 353-1993;ASTM E 1417-2005;ASTM E 1444-2005;ASTM E 1742-2008;SAE AMS-H-6875-1998;SAE AMS 2175-2003;SAE AMS 2248F-2006;SAE AMS 2360D-2007;SAE AMS 2694B-2007;SAE AMS 2700-2000;SAE AMS 2804C-2001;SAE
适用范围:This specification covers a corrosion-resistant steel in the form of investment castings. These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications. Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司