ISO 21003-2-2008 建筑物内部用冷热水装置的多层管道系统.第2部分:管道

标准号：ISO 21003-2-2008
中文标准名称：建筑物内部用冷热水装置的多层管道系统.第2部分:管道
英文标准名称：Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
标准类型：Q81
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Q81
国际标准分类号：91.140.60
引用标准：ISO 161-1;ISO 527-1-1993;ISO 527-2-1993;ISO 2578-1993;ISO 3126;ISO 6259-1-1997;ISO 7686;ISO 9080;ISO 10508;ISO 13760;ISO 15874-2;ISO 15875-2;ISO 15876-2;ISO 15877-2;ISO 17454;ISO 17455;ISO 17456;ISO 21003-1-2008;ISO 21003-5-2008;ISO 22391-2;EN 713;EN 1229
适用范围：This part of ISO 21003 specifies the characteristics of pipes for multilayer piping systems intended to be usedfor hot and cold water installations inside buildings for the conveyance of water -- whether or not the water isintended for human consumption (domestic systems) or heating systems -- under specified design pressuresand temperatures appropriate to the class of application (see Table I of ISO 21003-1:2008)It also specifies the lest parameters for the test methods referred to in this part of ISO 21003.ISO 21003 is a reference product standard It is applicable to multilayer pipes, fittings, their joints, and also tojoints with components made of other plastics and non-plastics materials intended to be used for hot and coldwater installations This part of ISO 21003 is intended for use only in conjunction with all the other parts ofISO 21003ISO 21003 covers a range of service conditions (application classes) and design pressures It is not applicablefor values of design temperature, T, maximum design temperature,T, and malfunction temperature, Tin excess of those in Table 1 of ISO 21003 1:2008NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspecls,taking into account their particular requirements and any relevant national regulat'ons and ~nstallation practices or codesThe polymeric materials used for the stress-designed layers are the following: polybutylene (PB), polyethyleneof raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) andchlorinated poly(vinyl chloride) (PVC-C).The PE-X used shall be fully crosslinked and shall comply with the requirements of lhe relevant referenceproduct standard (ISO t 5875)NOTE 2 For the purposes of ISO 21003, crosslinked polyethylene (PE-X) as well as adhesives are considered asthermoplastic materialsSolid-wall pipes with thin outer layers (applied as protection layers or barrier layers, for instance) are notcovered by ISO 21003 but are specified in the Amendments to ISO 15874-2, ISO 15875-2 and ISO 15878 2.The total thickness of such outer layers, including the thickness of the adhesives used, shall be ≤ 0,4 mm.