BS EN 1218-4-2004+A2-2009 木工机械的安全性.开榫机.第4部分:链式送料边缘铁条打捆机

标准号：BS EN 1218-4-2004+A2-2009
中文标准名称：木工机械的安全性.开榫机.第4部分:链式送料边缘铁条打捆机
英文标准名称：Safety of woodworking machines — Tenoning machines — Part 4: Edge banding machines fed by chain(s)
标准类型：J65
发布日期：2004/7/23 12:00:00
实施日期：2004/7/23 12:00:00
中国标准分类号：J65
国际标准分类号：79.120.10
引用标准：EN 61310-1-2008;CLC/TS 61496-2-2006;EN ISO 354-2003;EN ISO 3743-1-1995;EN ISO 3743-2-1996;EN ISO 3744-1995;EN ISO 3745-2003;EN ISO 3746-1995;EN ISO 4871-1996;EN ISO 9614-1-1995;EN ISO 11202-1995;EN ISO 11204-1995;EN ISO 11688-1-1998;EN ISO 12100-1-2003;EN
适用范围：This document deals with all the significant hazards, hazardous situations and events as listed in Clause 4which are relevant to edge banding machines fed by chain(s) where the loading and unloading is manual andwhere the maximum work-piece height capacity is 75 mm. The machine is designed to process in one pass,one end (single end machine) or both ends (double end machine) of solid wood, chipboard, fibreboard orplywood and also these materials where they are covered with plastic laminate or edgings. The work-piece isfed through the processing units by an integrated feed. For the purpose of this document an edge bandingmachine fed by chain(s) is hereinafter referred to as the machine.deleted textThis document does not apply to single and double end edge banding machines fed by chain or chains with acomplete enclosure as defined in 3.3.10.This document does not deal with any hazards relating to:a) mechanical loading of the work-piece to a single machine; orb) single machine being used in combination with any other machine (as part of a line); orc) use of tools working between the machine halves (see 3.3.1); ord) use of laser.For Computer Numerically Controlled (CNC) machines this document does not cover hazards related toElectro-Magnetic Compatibility (EMC).NOTE The requirements of this document apply to all machines whatever their method of control e.g.electromechanical and/or electronic.This document is primarily directed to machines which are manufactured after the date of publication by CEN.