BS EN 61000-6-2-2005 电磁兼容性(EMC).通用标准.工业环境的抗扰性

标准号：BS EN 61000-6-2-2005
中文标准名称：电磁兼容性(EMC).通用标准.工业环境的抗扰性
英文标准名称：Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial environments
标准类型：L06
发布日期：2005/12/23 12:00:00
实施日期：2005/12/23 12:00:00
中国标准分类号：L06
国际标准分类号：33.100.20
引用标准：IEC 60050-161;IEC 61000-4-2;IEC 61000-4-3;IEC 61000-4-4;IEC 61000-4-5
适用范围：This part of IEC 61000 for EMC immunity requirements applies to electrical and electronicapparatus intended for use in industrial environments, as described below. Immunityrequirements in the frequency range 0 Hz to 400 GHz are covered. No tests need to beperformed at frequencies where no requirements are specified.This generic EMC immunity standard is applicable if no relevant dedicated product orproduct-family EMC immunity standard exists.This standard applies to apparatus intended to be connected to a power network suppliedfrom a high or medium voltage transformer dedicated to the supply of an installation feedingmanufacturing or similar plant, and intended to operate in or in proximity to industriallocations, as described below. This standard applies also to apparatus which is batteryoperated and intended to be used in industrial locations.The environments encompassed by this standard are industrial, both indoor and outdoor.Industrial locations are in addition characterised by the existence of one or more of thefollowing:– industrial, scientific and medical (ISM) apparatus (as defined in CISPR 11);– heavy inductive or capacitive loads are frequently switched;– currents and associated magnetic fields are high.The immunity requirements have been selected to ensure an adequate level of immunity forapparatus at industrial locations. The levels do not, however, cover extreme cases, whichmay occur at any location, but with an extremely low probability of occurrence. Not alldisturbance phenomena have been included for testing purposes in this standard, but onlythose considered as relevant for the equipment covered by this standard. These testrequirements represent essential electromagnetic compatibility immunity requirements.Test requirements are specified for each port considered.