DIN 976-2-2009 螺栓.第2部分:公制干涉螺纹MFS

标准号：DIN 976-2-2009
中文标准名称：螺栓.第2部分:公制干涉螺纹MFS
英文标准名称：Stud bolts - Part 2: Metric interference thread MFS
标准类型：J13
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J13
国际标准分类号：21.060.10
引用标准：DIN EN 26157-1;DIN EN ISO 898-1;DIN EN ISO 3269;DIN EN ISO 3506-1;DIN EN ISO 4042;DIN EN ISO 4753;DIN EN ISO 4759-1;DIN EN ISO 8141-1;DIN EN ISO 10683;DIN EN ISO 16048;DIN ISO 262;DIN ISO 8992
适用范围：This standard specifies the dimensions and technical delivery conditions for stud bolts intended for use in light metals (including aluminium).Studo bolts complying with this standard are not suitable for use in steel or cast iron. For economic reasons, it is recommended that, instead of studs with a very small unthreaded portion, stud bolts with an interference-fit thread be used for such applications. However, care should be taken that the required depth of thread engagement is ensured, since stud bolts are not provided with a thread run-out, which normally determines the depth of thread engagement.Attention is drawn to the fact that stud bolts with lengths exceeding those specified for the lengths of engagement in DIN 8141-1 might not be true to gauge.