SAE MA 3377B-2008 拉伸强度为1275MPa的米制UNS NO7718镍合金螺栓和螺钉的采购规范

百检网 2021-07-20
标准号:SAE MA 3377B-2008
中文标准名称:拉伸强度为1275MPa的米制UNS NO7718镍合金螺栓和螺钉的采购规范
英文标准名称:Bolts and Screws, Nickel Alloy UNS NO7718, Tensile Strength 1275 MPa Procurement Specification, Metric
标准类型:V20
发布日期:2008/11/5 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:V20
国际标准分类号:49.030.20
引用标准:ASME B46.1-2002;ASTM D 3951-1998;ASTM E 8M-2004;ASTM E 21-2005;ASTM E 112-1996;ASTM E 139-2006;ASTM E 140-2007;ASTM E 1417-2005;SAE AMS 2700-2000;SAE AMS 2750D-2005;SAE AMS 5662;SAE AS 3062C-1979;SAE AS 3063B-1996;SAE MA 1370-1990;SAE MA 1518;SAE MA 1520-
适用范围:This document covers metric bolts and screws made from a corrosion and heat resistant, age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. The following specification designations and their properties are covered: MA3377 1275 MPa minimum ultimate tensile strength at room temperature; 1000 MPa minimum ultimate tensile strength at 650 °C; 690 MPa stress-rupture strength at 650 °C; 720 MPa tension to 72 MPa tension fatigue at room temperature and MA3377-1 1275 MPa minimum ultimate tensile strength at room temperature; 765 MPa minimum ultimate shear strength at room temperature; 720 MPa tension to 72 MPa tension fatigue at room temperature. Primarily for use in aerospace propulsion systems as follows: a. for use up to approximately 650 °C where elevated temperature tensile strength, stress-rupture strength, and resistance to relaxation are required; and b. for use up to approximately 425 °C where fatigue resistance, tensile strength, and shear strength are required.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司