IEC 61000-3-2-2018 电磁兼容性(EMC).第3-2部分:极限值.谐波电流辐射的极限值(设备输入电流不大于16A/相)

标准号：IEC 61000-3-2-2018
中文标准名称：电磁兼容性(EMC).第3-2部分:*限值.谐波电流辐射的*限值(设备输入电流不大于16A/相)
英文标准名称：Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
标准类型：L06
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L06
国际标准分类号：33.100.10
引用标准：IEC 60050-161-1990;IEC 60155-1993;IEC 60268-3-2013;IEC 60335-2-24-2010;IEC 61000-4-7-2002;IEC 61000-4-7 AMD 1-2008
适用范围：This part of IEC 61000 deals with the limitation of harmonic currents injected into the public supply system. It specifies limits of harmonic components of the input current which can be produced by equipment tested under specified conditions. This part of IEC 61000 is applicable to electrical and electronic equipment having a rated input current up to and including 16 A per phase, and intended to be connected to public low-voltage distribution systems. Arc welding equipment which is not professional equipment, with a rated input current up to and including 16 A per phase, is included in this document. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this document and can be subject to installation restrictions as indicated in IEC 61000-3-12. The tests according to this document are type tests. For systems with nominal voltages less than but not equal to 220 V (line-to-neutral), the limits have not yet been considered. NOTE The words apparatus, appliance, device and equipment are used throughout this document. They have the same meaning for the purposes of this document.