ISO 12176-2-2008 塑料管材和管件.熔解焊接聚乙烯系统用设备.第2部分:电熔焊

百检网 2021-07-31
标准号:ISO 12176-2-2008
中文标准名称:塑料管材和管件.熔解焊接聚乙烯系统用设备.第2部分:电熔焊
英文标准名称:Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion
标准类型:J64;G33
发布日期:2008/6/15 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:J64;G33
国际标准分类号:23.040.20;23.040.45;75.200
引用标准:ISO 13950;IEC 60068-2-27;IEC 60335-1;IEC 60335-2-45;IEC 60529;IEC 61558-1;IEC 61558-2-6
适用范围:This part of ISO 12176 specifies performance requirements for electrofusion control units for use withpolyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water forhuman consumption, including raw water prior to treatment, and for the conveyance of water for generalpurpose or other fluids.The control units are divided into three input voltage classes: SVLV [safety, very Iow voltage (up to 50 V)], LV[Iow voltage (50 V to 250 V)] and HV [higher voltage (250 V to 400 V)].This part of ISO 12176 is applicable to electrofusion control units designed for use in the construction of jointsbetween PE pipes and fittings conforming to International Standards for the supply of gaseous fuels or for theconveyance of water, where the normal operating temperature of the control unit is in the range -10 ~C to+40 ~C. If temperatures outside this range are expected, suitable operating limits are subject to agreementbetween manufacturer and purchaser.This part of ISO 12176 is applicable to control units with current or voltage control for fitting systems based onstandard resistance wire heating technology.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司