DIN EN 13035-1-2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.第1部分:工厂内的储存、搬运和运输设备

百检网 2021-07-31
标准号:DIN EN 13035-1-2008
中文标准名称:平面玻璃的制造、处理和加工用机械和设备.安全要求.第1部分:工厂内的储存、搬运和运输设备
英文标准名称:Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory; English version of DIN EN 13035-1:2008-06
标准类型:Q93
发布日期:1999/12/31 12:00:00
实施日期:2008/6/1 12:00:00
中国标准分类号:Q93
国际标准分类号:81.100
引用标准:EN 294-1992;EN 349-1993;EN 811-1996;EN 953-1997;EN 954-1-1996;EN 983-1996;EN 999-1998;EN 1037-1995;EN 1088-1995;EN 1757-3-2002;EN 13155-2003;EN 60204-1-2006;EN ISO 11201-1995;EN ISO 11202-1995;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13850-2006;EN I
适用范围: 1.1 This standard contains the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies to stationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment (see 3.3) and transportation equipment (see 3.4) (see overview in Annex A). 1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt within prEN 13035-2.1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes,hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with theglass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1.1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment forthe storage, handling and transportation of flat glass, when they are used as intended and under the conditions ofmisuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies theappropriate technical measures to eliminate or reduce risks arising from the significant hazards duringcommissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for anytype of equipment in the scope of this standard.1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside thefactory, which is manufactured before the date of its publication as EN.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司