BS EN 13035-1-2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.工厂内部储存、装卸与运输设备

标准号：BS EN 13035-1-2008
中文标准名称：平面玻璃的制造、处理和加工用机械和设备.安全要求.工厂内部储存、装卸与运输设备
英文标准名称：Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
标准类型：Y93
发布日期：2008/4/30 12:00:00
实施日期：2008/4/30 12:00:00
中国标准分类号：Y93
国际标准分类号：81.100
引用标准：EN 294-1992;EN 349-1993;EN 811-1996;EN 953-1997;EN 954-1-1996;EN 983-1996;EN 999-1998;EN 1037-1995;EN 1088-1995;EN 1757-3-2002;EN 13155-2003;EN 60204-1-2006;EN ISO 11201-1995;EN ISO 11202-1995;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13850-2006;EN I
适用范围：1.1 This standard contains the requirements for safety for the design and installation of equipment intended forthe storage, handling and transportation of flat glass inside the factory as described in Clause 3. It applies tostationary, movable and mobile storage equipment (see 3.2), mechanical and pneumatic handling equipment(see 3.3) and transportation equipment (see 3.4) (see overview in Annex A).1.2 Additional requirements for dealing with specific hazards due to the use outside the factory are dealt within prEN 13035-2.1.3 This standard only deals with the devices which are directly in contact with the glass. Tractors, cranes,hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact with theglass (see 3.4.1). This standard does not apply to manual handling equipment as defined in 3.3.1.1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipment forthe storage, handling and transportation of flat glass, when they are used as intended and under the conditions ofmisuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies theappropriate technical measures to eliminate or reduce risks arising from the significant hazards duringcommissioning, the operation and maintenance. Noise has not been considered to be a significant hazard for anytype of equipment in the scope of this standard.1.5 This document is not applicable to storage, handling or transportation equipment for flat glass inside thefactory, which is manufactured before the date of its publication as EN.