ISO 10110-5-2007 光学和光子学.光学元件和系统制图准备.第5部分:表面形状公差

标准号：ISO 10110-5-2007
中文标准名称：光学和光子学.光学元件和系统制图准备.第5部分:表面形状公差
英文标准名称：Optics and photonics - Preparation of drawings for optical elements and systems - Part 5: Surface form tolerances
标准类型：N30
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：N30
国际标准分类号：01.100.20;37.020
引用标准：ISO 7944-1998;ISO 10110-1-2006;ISO 10110-10;ISO 14999-4-2007
适用范围：ISO 10110 specifies the presentation of design and functional requirements for optical elements and systemsin technical drawings used for manufacturing and inspection.This part of ISO 10110 specifies rules for indicating the tolerance for surface form.NOTE 1 The terminology of interferometry is used for the specification of tolerances and, in particular, for the units inwhich the tolerances are to be specified; however, this does not stipulate that only interferometric methods may be usedfor the actual testing of optical parts. Other non-interferometric methods may be used if the results are converted to theunits specified here.This part of ISO 10110 applies to surfaces of both spherical and aspheric form.NOTE 2 ISO 10110-12 allows the surface form tolerance for aspheric surfaces to be specified without reference to thispart of ISO 10110.