BS EN 13476-3-2007+A1-2009 无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.B型、有平滑内外表面及系统的管和配件用规范

标准号：BS EN 13476-3-2007+A1-2009
中文标准名称：无压地下排水和污水塑料管系统.未增塑聚氯乙烯(PVC-U)、聚丙烯(PP)和聚乙烯(PE)结构壁管系统.B型、有平滑内外表面及系统的管和配件用规范
英文标准名称：Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3:Specifications for pipes and fittings with smooth
标准类型：Q81
发布日期：2007/7/31 12:00:00
实施日期：2007/7/31 12:00:00
中国标准分类号：Q81
国际标准分类号：23.040.20;93.030
引用标准：EN 476;EN 580;EN 681-1;EN 681-2;EN 681-4;EN 727;EN 728;EN 744;EN 922;EN 1053;EN 1055-1996;EN 1277;EN 1401-1;EN 1411;EN 1437;EN 1446;EN 1852-1;EN 1905;EN 1979;EN 12061;EN 12256;EN 12666-1;EN 13476-1-2007;EN 13476-2-2007;CEN/TS 14541-2007;EN 14741;EN 14758-
适用范围：This part of EN 13476, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems.This part is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B.It specifies test methods and test parameters as well as requirements.This part is applicable to:a) structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure, reflected in the marking of products by “U”;b) structured-wall pipes and fittings, which are intended to be used buried underground both outside(application area code “U”) and within the building structure (application area code “D”), reflected in themarking of products by “UD”.This part is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints.This part covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application classes, and tolerance classes and gives recommendations concerning colours.