DIN EN 14753-2008 机械安全.连续铸钢机械和设备的安全要求

标准号：DIN EN 14753-2008
中文标准名称：机械安全.连续铸钢机械和设备的安全要求
英文标准名称：Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel; English version of DIN EN 14753:2008-03
标准类型：H90
发布日期：1999/12/31 12:00:00
实施日期：2008/3/1 12:00:00
中国标准分类号：H90
国际标准分类号：77.180
引用标准：EN 294;EN 349;EN 574;EN 614-1;EN 614-2;EN 626-1-1994;EN 626-2-1996;EN 811;EN 842;EN 953-1997;EN 981;EN 982;EN 983;EN 1037-1995;EN 1050;EN 1088;EN 1837;EN 12094-1;EN 13478;prEN 15004-1;EN 50171;EN 60204-1-2006;EN 61310-1;EN 61310-2;EN ISO 4871-1996;EN ISO
适用范围：This European Standard applies for plant (containing machinery and equipment) used in the process ofcontinuous casting of liquid steel (hereafter referred to as continuous casting machine, CCM) as defined in 3.1and illustrated in Annex B.This European Standard deals with all significant hazards, hazardous situations and events relevant tomachinery and equipment for the continuous casting of steel, when they are used as intended and underconditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the safety requirements to be met during design, assembly, transport,commissioning, operation, maintenance (as described in Clause 5) and decommissioning of the equipment.This European Standard assumes that the machinery and equipment of the plant is operated and maintainedby adequately trained and competent personnel (see 7.4). Manual intervention for setting, adjustment andmaintenance is accepted as part of the intended use of the plant.This European Standard assumes that the machinery is used with adequate workplace lighting conforming toEN 12464-1.NOTE Local regulations regarding lighting should be considered and could differ from requirements of EN 12464-1.This European Standard applies to:CCM for the transformation of molten liquid steel into solid products in sections (e.g. square, rectangular,beam blank, circular)-- from the point where overhead cranes or other transport systems deposit ladles (e.g. in a ladle turret or ladle car);-- via casting process;-- via cutting equipment;-- to the run-out-area where the cut product is collected. This European Standard does not cover safety requirements for: -- auxiliary plants (e.g. water treatment, refractory handling); -- ladles; -- cranes; -- winches and hoists; -- conveyors or handling systems. This European Standard is not applicable to CCM, manufactured before the date of publication of this standard by CEN.