ISO 9012-2008 气焊设备.吸气式手工焊炬.规范和试验

标准号：ISO 9012-2008
中文标准名称：气焊设备.吸气式手工焊炬.规范和试验
英文标准名称：Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests
标准类型：J64
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J64
国际标准分类号：25.160.30
引用标准：ISO 554;ISO 9090;ISO 9539
适用范围：This International Standard specifies requirements and test methods for air-aspirated hand blowpipes.This International Standard applies to blowpipes for brazing, soldering, heating, fusion and other allied thermalprocesses, which use a fuel gas and aspirated air (injector-type blowpipes), and are intended for manual use.This International Standard is applicable to:-air-aspirated hand blowpipes which are fed with a fuel gas in the gaseous phase, at a controlled pressureby a regulator, through a gas supply hose;- air-aspirated hand blowpipes which are fed with a liquefied fuel gas in the gaseous phase at the containerpressure, through a gas supply hose;- so-called liquid-phase blowpipes which are fed with a fuel gas in the liquid phase, and where thermalevaporation takes place within the blowpipe.It does not apply to blowpipes in which the fuel gas leaves the injector in the liquid phase, or to so-called“cartridge” blowpipes where the gas supply is fixed directly onto the blowpipe and possibly constitutes the shank.NOTE Figures 1 to 4 of this International Standard are given for guidance only, to facilitate the explanation of theterms. They do not specify the construction details which are left to the discretion of the manufacturer.