BS 1722-10-2006 栅栏.链节和焊接筛网的防盗栅栏用规范

标准号：BS 1722-10-2006
中文标准名称：栅栏.链节和焊接筛网的防盗栅栏用规范
英文标准名称：Fences - Specification for anti-intruder fences in chain link and welded mesh
标准类型：Q73
发布日期：2006/11/30 12:00:00
实施日期：2006/11/30 12:00:00
中国标准分类号：Q73
国际标准分类号：91.090
引用标准：BS 4-1;BS 1722-16;BS 3892;BS 4027;BS 4102
适用范围：This part of BS 1722 specifies requirements for anti-intruder chain linkor welded mesh fences and gates of at least 2.4 m in height for situationsthat require a higher level of protection than that offered by fencesconforming to BS 1722-1. It also includes requirements for theinstallation of the fencing at the specified location.Provision is made for either single or double extension arms.This standard includes requirements for component dimensions,together with the permissible tolerances on size. These are minimumrequirements and it should normally be acceptable to use larger sizes,except if this could otherwise adversely affect the fitting of componentsor if replacement parts are required to match with those alreadypresent.This standard includes requirements for protective treatments.However, maintenance requirements for the fence after installation areoutside the scope of this standard.It specifies concrete or steel posts and struts, steel gates and gate postsand zinc coated or plastic coated zinc coated wire or mesh infill.This standard specifies requirements for fence materials and theircombination and installation. Because a fence is made up of a numberof separate components of which the particular features vary, e.g. zinccoated or plastic coated wire, a number of combinations are available tothe user. Annex C provides details of the fence requirements andinstallation site that should be agreed between the fence supplier andpurchaser at the time of ordering a fence. However, as conditions varyfrom site to site, Annex C should not be assumed to be exhaustive.