ISO 13628-10-2005 石油和天然气工业.水下采油系统的设计和操作.第10部分:连接柔性管规范

标准号：ISO 13628-10-2005
中文标准名称：石油和天然气工业.水下采油系统的设计和操作.第10部分:连接柔性管规范
英文标准名称：Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe
标准类型：E15
发布日期：2005/10/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：E15
国际标准分类号：75.180.10
适用范围：1.1 Purpose1.1.1 This part of ISO 13628 defines the technical requirements for safe, dimensionally and functionallyinterchangeable bonded flexible pipes that are designed and manufactured to uniform standards and criteria.See Figure 1 for explanatory figure on typical bonded flexible pipe.1.1.2 Minimum requirements are specified for the design, material selection, manufacture, testing, markingand packaging of bonded flexible pipes, with reference to existing codes and standards where applicable. SeeAPI RP 17B for guidelines on the use of flexible pipes and ancillary components.1.2 Products1.2.1 This part of ISO 13628 applies to bonded flexible pipe assemblies, consisting of segments of flexiblepipe body with end fittings attached to both ends. This part of ISO 13628 does not cover flexible pipes ofunbonded structure. See ISO 13628-2 for guidance on unbonded flexible pipes.NOTE For the purposes of this provision, API Spec 17J[10] is equivalent to ISO 13628-2.1.2.2 This part of ISO 13628 does not apply to flexible pipe ancillary components. Guidelines for ancillarycomponents are given in API RP 17B.1.2.3 This part of ISO 13628 can be applied to flexible pipes that include non-metallic reinforcing layers,though no effort was made to address the specific and unique technological aspects of this product.1.2.4 This part of ISO 13628 can be applied to a bonded construction pipe that includes a material or layerconstruction that is covered in ISO 13628-2.1.3 Applications1.3.1 The applications addressed by this part of ISO 13628 are sweet and sour service production,including export and injection applications. Production products include oil, gas, water and injection chemicals.This part of ISO 13628 applies to both static and dynamic flexible pipes used as flowlines, risers, jumpers andoffshore loading and discharge hoses. This part of ISO 13628 applies to pipes with a design pressure greaterthan or equal to 1,5 MPa (15 bar). This part of ISO 13628 can be used for lower design pressure pipes,though the requirements of these pipes have not been specifically addressed. Reference OCIMF[30] forguidelines on these pipes.1.3.2 This part of ISO 13628 does not apply to flexible pipes for use in choke and kill line applications. SeeAPI Spec 16C for guidance on choke and kill line applications. This part of ISO 13628 can be applied toflexible pipes for pile hammer, gas flare, water supply and jetting applications, though no effort was made toaddress the specific and unique technological aspects relating to each of these requirements.