BS ISO 15901-2-2007 用水银孔率法和气体吸附法测定固体材料孔径分布和孔隙率.用气体吸附法分析介孔和微孔

百检网 2021-08-02
标准号:BS ISO 15901-2-2007
中文标准名称:用水银孔率法和气体吸附法测定固体材料孔径分布和孔隙率.用气体吸附法分析介孔和微孔
英文标准名称:Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
标准类型:A42
发布日期:2007/3/30 12:00:00
实施日期:2007/3/30 12:00:00
中国标准分类号:A42
国际标准分类号:19.120
适用范围:This part of ISO 15901 describes a method for the evaluation of porosity and pore size distribution by gas adsorption. It is a comparative, rather than an absolute test. The method is limited to the determination of the quantity of a gas adsorbed per unit mass of sample at a controlled, constant temperature. This part of ISO 15901 does not specify the use of a particular adsorptive gas, however nitrogen is the adsorptive gas most commonly used in such methods. Similarly, the temperature of liquid nitrogen is the analysis temperature most commonly used. Use is sometimes made of other adsorptive gases, including argon, carbon dioxide and krypton, and other analysis temperatures, including those of liquid argon and solid carbon dioxide. In the case of nitrogen adsorption at liquid nitrogen temperature, the basis of this method is to measure the quantity of nitrogen adsorbed at 77 K as a function of its relative pressure. Traditionally, nitrogen adsorption is most appropriate for pores in the approximate range of widths 0,4 nm to 50 nm. Improvements in temperature control and pressure measurement now allow larger pore widths to be evaluated. This part of ISO 15901 describes the calculation of mesopore size distribution between 2 nm and 50 nm, and of macropore distribution up to 100 nm. The method described in this part of ISO 15901 is suitable for a wide range of porous materials, even though the pore structure of certain materials is sometimes modified by pretreatment or cooling. Two groups of procedures are specified to determine the amount of gas adsorbed: -- those which depend on the measurement of the amount of gas removed from the gas phase (i.e. gas volumetric methods), and -- those which involve the measurement of the uptake of the gas by the adsorbent (i.e. direct determination of increase in mass by gravimetric methods). In practice, static or dynamic techniques can be used to determine the amount of gas adsorbed. To derive pore size distribution from the isotherm, it is necessary to apply one or more mathematical models, which entails simplifying certain basic assumptions.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司