BS EN 1997-1-2004 欧洲法规7.土木技术设计.总则

百检网 2021-08-02
标准号:BS EN 1997-1-2004
中文标准名称:欧洲法规7.土木技术设计.总则
英文标准名称:Eurocode 7. Geotechnical design - General rules
标准类型:P23
发布日期:2004/12/22 12:00:00
实施日期:2004/12/22 12:00:00
中国标准分类号:P23
国际标准分类号:91.010.30;93.020
引用标准:EN 1990-2002;EN 1991;EN 1991-4;EN 1992;EN 1993;EN 1994;EN 1995;EN 1996;EN 1997-2;EN 1998;EN 1999;EN 1536-1999;EN 1537-1999;EN 12063-1999;EN 12699-2000;EN 14199;EN ISO 13793-2001
适用范围:1 Scope of EN 1997 (1) EN 1997 is intended to be used in conjunction with EN 1990:2002, which establishes the principles and requirements for safety and serviceability, describes the basis of design and verification and gives guidelines for related aspects of structural reliability. (2) EN 1997 is intended to be applied to the geotechnical aspects of the design of buildings and civil engineering works. It is subdivided into various separate parts (see 1.1.2 and 1.1.3). (3) EN 1997 is concerned with the requirements for strength, stability, serviceability and durability of structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered. (4) Numerical values of actions on buildings and civil engineering works to be taken into account in design are provided in EN 1991 for the various types of construction. Actions imposed by the ground, such as earth pressures, shall be calculated according to the rules of EN 1997. (5) Separate European Standards are intended to be used to treat matters of execution and workmanship. They are denoted in the relevant sections. (6) In EN 1997 execution is covered to the extent that is necessary to comply with the assumptions of the design rules. (7) EN 1997 does not cover the special requirements of seismic design. EN 1998 provides additional rules for geotechnical seismic design, which complete or adapt the rules of this Standard. 2 Scope of EN 1997-1 (1) EN 1997-1 is intended to be used as a general basis for the geotechnical aspects of the design of buildings and civil engineering works. (2) The following subjects are dealt with in EN 1997-1: Section 1: General Section 2: Basis of geotechnical design Section 3: Geotechnical data Section 4: Supervision of construction, monitoring and maintenance Section 5: Fill, dewatering, ground improvement and reinforcement Section 6: Spread foundations Section 7: Pile foundations Section 8: Anchorages Section 9: Retaining structures Section 10: Hydraulic failure Section 11: Overall stability Section 12: Embankments (3) EN 1997-1 is accompanied by Annexes A to J, which provide: — in A: recommended partial safety factor values; different values of the partial factors may be set by the National annex; — in B to J: supplementary informative guidance such as internationally applied calculation methods. 3 Further Parts of EN 1997 (1) EN 1997-1 is supplemented by EN 1997-2 that provides requirements for the performance and evaluation of field and laboratory testing.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司