BS EN 14462-2005+A1-2009 表面处理设备.包括其辅助操作装置在内的表面处理设备的噪声试验规程.精度等级2和3

标准号：BS EN 14462-2005+A1-2009
中文标准名称：表面处理设备.包括其辅助操作装置在内的表面处理设备的噪声试验规程.精度等级2和3
英文标准名称：Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
标准类型：A29
发布日期：2005/2/21 12:00:00
实施日期：2005/2/21 12:00:00
中国标准分类号：A29
国际标准分类号：17.140.20;25.220.01
引用标准：EN 1539;EN 1953;EN 12215;EN 12581;EN 12621;EN 12753;EN 12757-1;EN 12921-1;EN 12921-2;EN 12921-3;EN 12921-4;EN 12981;EN 13355;EN 61672-1;EN ISO 3744;EN ISO 3746;EN ISO 3747;EN ISO 4871-1996;EN ISO 9614-1;EN ISO 9614-2;EN ISO 11201;EN ISO 11202;EN ISO 11204
适用范围：This document specifies all the information necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the airborne noise emission of surface treatment machines as statedin Annex A. Surface treatment machines include but are not limited to-machines for cleaning and pre-treatment of industrial item surfaces,-machinery for coating and colour mixing,-coating plantsand-dryers, ovens and evaporating equipment.This document describes the determination of emission sound pressure levels at work stations or other specified positions as well as the determination of sound power levels for surface treatment machines as stated in Annex A.This can be small single units (e.g. handheld atomising spraying equipment) and also complex machines with large dimensions (e.g. machines for cleaning and pre-treatment of industrial item surfaces, spray booths, dryers), which could also be linked.In case of very large machines as defined in 3.10 the determination of sound power level may be very complicated or cannot be done with a reasonable amount of work. Therefore in this document, the measurement for very large machines is simplified by determining an averaged emission sound pressure level instead of the sound power level.This document specifies noise measurement methods, installation/mounting and operation conditions that shall be used for the test. The use of this document ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used (see 5.1 and 6.1). Noise measurement methods allowed by this document are engineering methods (grade 2)and survey methods (grade 3).For continuous flow dryers for paper, board and foil (see EN 13023).This document applies to surface treatment machines manufactured after the date of issue of this document.