BS EN 1993-1-3-2006 欧洲法规3.钢结构的设计.一般规则.冷成型薄模和薄板补充规则

标准号：BS EN 1993-1-3-2006
中文标准名称：欧洲法规3.钢结构的设计.一般规则.冷成型薄模和薄板补充规则
英文标准名称：Eurocode 3. Design of steel structures - General rules - Supplementary rules for cold-formed members and sheeting
标准类型：P26
发布日期：2006/11/30 12:00:00
实施日期：2006/11/30 12:00:00
中国标准分类号：P26
国际标准分类号：91.010.30;91.080.10
引用标准：EN 1993;EN 10002;EN 10025-1;EN 10025-2;EN 10025-3;EN 10025-4;EN 10025-5;EN 10143;EN 10149;EN 10204;EN 10268;EN 10292;EN 10326;EN 10327;EN-ISO 12944-2;EN 1090-2;EN 1994;EN ISO 1478;EN ISO 1479;EN ISO 2702;EN ISO 7049;EN ISO 10684;ISO 4997;EN 508-1;FEM 10.2
适用范围：(1)EN 1993-1-3 gives design requirements for cold-formed members and sheeting. It applies tocold-formed steel products made from coated or uncoated hot or cold rolled sheet or strip, that havebeen cold-formed by such processes as cold-rolled forming or press-braking. It may also be used for the designof profiled steel sheeting for composite steel and concrete slabs at the construction stage, see EN 1994. Theexecution of steel structures made of cold-formed members and sheeting is covered in EN 1090.(2) Methods are also given for stressed-skin design using steel sheeting as a structural diaphragm.(3) This part does not apply to cold-formed circular and rectangular structural hollow sections supplied to EN10219, for which reference should be made to EN 1993-1-1 and EN 1993-1-8.(4) EN 1993-1-3 gives methods for design by calculation and for design assisted by testing. The methods fordesign by calculation apply only within stated ranges of material properties and geometrical proportions forwhich sufficient experience and test evidence is available. These limitations do not apply to design assisted bytesting.(5) EN 1993-1-3 does not cover load arrangement for testing for loads during execution and maintenance.(6) The calculation rules given in this standard are only valid if the tolerances of the cold formed memberscomply with EN 1090-2