BS EN 61290-1-1-2006 光纤放大器.试验方法.第1-1部分:功率和增益参数.光学频谱分析仪法

标准号：BS EN 61290-1-1-2006
中文标准名称：光纤放大器.试验方法.第1-1部分:功率和增益参数.光学频谱分析仪法
英文标准名称：Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
标准类型：M33
发布日期：2007/1/31 12:00:00
实施日期：2007/1/31 12:00:00
中国标准分类号：M33
国际标准分类号：33.180.30
引用标准：IEC 61291-1
适用范围：This International Standard applies to all commercially available optical amplifiers (OAs) and optically amplified modules. It applies to OAs using optically pumped fibers (OFAs based on either rare-earth doped fibers or on the Raman effect), semiconductor OAs (SOAs) and waveguides (POWAs).The object of this standard is to establish uniform requirements for accurate and reliable measurements, by means of the optical spectrum analyzer test method, of the following OA parameters, as defined in IEC 61291-1:a) nominal output signal power;b) gain;c) reverse gain;d) maximum gain;e) maximum gain wavelength;f) maximum gain variation with temperature;g) gain wavelength band;h) gain wavelength variation;i) gain stability;j) polarization-dependent gain;k) large-signal output stability;l) saturation output power;m) maximum input signal power;n) maximum output signal power;o) input power range;p) output power range;q) maximum total output power.NOTE All numerical values followed by (‡) are suggested values for which the measurement is assured. Other values may be acceptable but should be verified.The object of this standard is specifically directed to single-channel amplifiers. For multichannel amplifiers, one should refer to the IEC 61290-10 series.