IEC 60870-5-103-1997 远动设备和系统 第5部分:传输规约 第103节:保护设备信息接口的配套标准

标准号：IEC 60870-5-103-1997
中文标准名称：远动设备和系统 第5部分:传输规约 第103节:保护设备信息接口的配套标准
英文标准名称：Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the informative interface of protection equipment
标准类型：M54
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：M54
国际标准分类号：33.200
适用范围：This section of IEC 60870-5 applies to protection equipment with coded bit serial data transmission for exchanging information with control systems. It defines a companion standard that enables interoperability between protection equipment and devices of a control system in a substation. The defined companion standard utilizes standards of the IEC 60870-5 series. This section of IEC 60870-5 presents specifications for the informative interface of protection equipment. This standard does not necessarily apply to equipment that combines protection and control functions in the same device sharing a single communication port. This section of IEC 60870-5 describes two methods of information exchange: the first is based on explicitly specified APPLICATION SERVICE DATA UNITS (ASDUs) and application procedures for transmission of 'standardized' messages, and the second uses generic services for transmission of nearly all possible information. The 'standardized' messages do not cover all possible protection functions, and furthermore a protection device may support only a subset of the messages specified in this standard. For interoperability purposes, in specific applications, this subset has to be specified in clause 8. The use of predefined messages and application procedures is mandatory, if applicable. In other cases generic services shall be used. The 'private ranges' defined in this standard are maintained for compatibility reasons; however, their use is not recommended for future applications.