BS 5341-8.1-1992 往复式内燃机直径小于等于200mm的活塞环.第8部分:多片组合式控油环设计、尺寸和命名.第1节:盘簧加压控油环规范

百检网 2021-08-02
标准号:BS 5341-8.1-1992
中文标准名称:往复式内燃机直径小于等于200mm的活塞环.第8部分:多片组合式控油环设计、尺寸和命名.第1节:盘簧加压控油环规范
英文标准名称:Piston rings up to 200 mm diameter for reciprocating internal combustion engines - Designs, dimensions and designations for multi-piece oil control rings - Specification for coil-spring-loaded oil control rings
标准类型:J92
发布日期:1992/5/1 12:00:00
实施日期:1992/5/1 12:00:00
中国标准分类号:J92
国际标准分类号:43.060.10
适用范围:This International Standard specifies the essential dimensions of piston ring types DSF-C, DSF-CNP, SSF, GSF, DSF, DSF-NG and SSF-L coil-spring-loaded oil control rings. For the cast iron part the recommended material is class 10 ac-cording to ISO 6621-3. For special applications material classes 20 to 50 may be used. Variation in face design and spring groove from these may be used, as recommended by individual manufacturers, in plain or chromed versions. The tangential forces of coil-spring-loaded oil control rings can be varied over a wide range. Explanations and recommenda-tions are given in clause 6. The normal range for axial width of coil-spring-loaded oil con-trol rings (3 to 8 mm inclusive) is divided into 0,5 or 1,0 mm steps. In tables 15 to 20 dimensions are given for coil-spring-loaded oil control rings with an axial width of 4,75 mm (i.e. 3/16 in) for existing applications in inch units. This International Standard applies to coil-spring-loaded oil control rings up to 200 mm inclusive for reciprocating internal combustion engines. It may also be used for piston rings of compressors working under analogous conditions.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司