BS EN ISO 9614-2-1997 声学.利用声强度对噪声源声功率级别的测定.使用扫描测量法

百检网 2021-08-02
标准号:BS EN ISO 9614-2-1997
中文标准名称:声学.利用声强度对噪声源声功率级别的测定.使用扫描测量法
英文标准名称:Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement by scanning
标准类型:Z32
发布日期:1997/4/15 12:00:00
实施日期:1997/4/15 12:00:00
中国标准分类号:Z32
国际标准分类号:17.140.01
适用范围:1 This part of ISO 9614 specifies a method for measuring the component of sound intensity normal to a measurement surface which is chosen so as to enclose the noise source(s) of which the sound power level is to be determined. Surface integration of the intensity component normal to the measurement surface is approximated by sub-dividing the measurement surface into contiguous segments, and scanning the intensity probe over each segment along a continuous path which covers the extent of the segment. The measurement instrument determines the average normal intensity component and averaged squared sound pressure over the dur-ation of each scan. The scanning operation may be performed either manually or by means of a mechan-ical system. Band-limited weighted sound power level is calcu-lated from the measured octave or one-third-octave band values. The method is applicable to any source for which a physically stationary measurement sur-face can be defined, and on which the noises gener-ated by the source under test and by other significant extraneous sources are stationary in time, as defined in 3.13. The source is defined by the choice of meas-urement surface. The method is applicable in situ, or in special-purpose test environments. This part of ISO 9614 specifies certain ancillary pro-cedures, described in annex B, to be followed in conjunction with the sound power determination. The results are used to indicate the quality of the deter-mination, and hence the grade of accuracy. If the in- dicated quality of the determination does not meet the requirements of this part of ISO 9614, the test procedure is to be modified in the manner indicated. This part of ISO 9614 does not apply in any frequency band in which the sound power of the source is found to be negative on measurement. 2 This part of ISO 9614 is applicable to sources situated in any environment which is neither so vari-able in time as to reduce the accuracy of the meas-urement of sound intensity to an unacceptable degree, nor subjects the intensity measurement probe to gas flows of unacceptable speed or un-steadiness (see 5.2.2, 5.3 and 5.4). In some cases it will be found that the test conditions are too adverse to allow the requirements of this part of ISO 9614 to be met. Extraneous noise levels may exceed the dynamic capability of the measuring in-strument or may vary to an excessive degree during the test. In such cases the method given in this part of ISO 9614 is not suitable for the determination of the sound power level of the source. NOTE 1 Other methods (e.g. determination of sound power levels from surface vibration levels as described in ISO/TR 7849) may be more suitable.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司