BS DD 208-1992 往复式内燃机用的直径为200mm及其以下的活塞环:窄环宽度的矩形截面活塞环的规范

标准号：BS DD 208-1992
中文标准名称：往复式内燃机用的直径为200mm及其以下的活塞环:窄环宽度的矩形截面活塞环的规范
英文标准名称：Piston rings up to 200 mm diameter for reciprocating internal combustion engines: specification for rectangular rings with narrow ring width
标准类型：J92
发布日期：1992/5/1 12:00:00
实施日期：1992/5/1 12:00:00
中国标准分类号：J92
国际标准分类号：43.060.10
适用范围：This Technical Report specifies the essential dimensional features of R-, B- and M-rectangular piston ring types with narrow ring width. Dimension tables 8 and 9 allow for the use of cast iron or steel. Since the modulus of elasticity of steel rings is higher than that of cast iron rings, the fluctuation in the surface pressure will become greater if the free gap is set as the reference for forces. Therefore forces are set using the surface pressure as the reference, in order to mininize the effect of the fluctuation.The requirements of this Technical Report apply to rectangular piston rings of reciprocating internal combustion piston engines, up to and including 90 mm diameter for cast iron rings and up to and including 100 mm diameter for steel.It may also be used for piston rings of compressors working under similar conditions.