ISO 19973-3-2007 气压传动.通过测试评定元件的可靠度.第3部分:带活塞杆的气缸

标准号：ISO 19973-3-2007
中文标准名称：气压传动.通过测试评定元件的可靠度.第3部分:带活塞杆的气缸
英文标准名称：Pneumatic fluid power - Assessment of component reliability by testing - Part 3: Cylinders with piston rod
标准类型：J20
发布日期：2007/8/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J20
国际标准分类号：23.100.01
引用标准：ISO 1000;ISO 1219-1;ISO 5598;ISO 6430;ISO 6432;ISO 10099-2001;ISO 15552;ISO 19973-1;ISO 21287;IEC 60050-191
适用范围：This part of ISO 19973 provides test procedures for determining reliability of pneumatic cylinders with pistonrod by testing and the methods of reporting the results of testing. The general test conditions and thecalculation method provided in Part 1 of ISO 19973 apply to the first failure without repairs, but excludeoutliers.The lifetime of pneumatic cylinders is usually given in number of cycles or in kilometres. Therefore, wheneverthe term “time” is used in this part of ISO 19973, this variable is to be understood as cycles or kilometres.This part of ISO 19973 also specifies test equipment and threshold levels for tests to determine the reliabilityof pneumatic cylinders with piston rods, both single-acting and double-acting.This part of ISO 19973 is intended to be applied to pneumatic piston rod cylinders that conform to ISO 6430,ISO 6432, ISO 15552 and ISO 21287; however, pneumatic piston rod cylinders that do not conform to theseInternational Standards but are used in the same range of operating conditions can be tested in accordancewith one of the classes defined in Tables 1 and 2 of this part of ISO 19973. It is necessary that any deviationfrom this part of ISO 19973 be documented in the test report.